Livestock Drinking Water Treatment

Drinking water should be clean and safe. Regardless of who drinks it, it is necessary the water is safe and clean. Among livestock, cows, the source of milk and milk products in the U.S. also needs to drink clean and safe water.

The quality of water is crucial to the production of milk among cows. It is noted that a cow can consume up to 25 gallons of drinking water everyday, however the amount can get lesser if the quality of water it drinks is poor, meaning it is being contaminated which affect the odor and taste.

Drinking water contaminated with harmful microorganisms can likewise affect the milk production of dairy cows. It is of paramount importance that the drinking water for cows is free from water-borne microorganisms that can pose danger to cows’ health. With this concern the need for an effective livestock drinking water treatment because urgent.

In dairy farms, where all microorganisms can harbor anytime which makes the cow’s prone to diseases should be prevented. Drinking water troughs must be kept clean because these water receptacles are the breeding grounds of some coliform bacteria which do not only infect cows but humans too. Livestock drinking water treatment should include this concern.

According to Ray Hozalski of the Department of Civil Engineering, University of Minnesota, livestock drinking water treatment might be costly depending on the contaminants that is targeted to eliminate. If the target of the livestock drinking water treatment is to kill the harmful microorganisms, what might be needed is just disinfection. What will be needed is desirable amount of chlorine to disinfect the water; this could be a little affordable compared with other water treatment methods.

Ultraviolet light, which no longer need chemical in treating drinking water, is another option. Ultraviolet light has its own limitation however on turbid water, water residue is not included in the disinfection process. Distillation like reverse osmosis is used in the removal of nitrate and sulfate content in water, however the former is not well patronized because it is costly.

There other factors that need to be considered in treating drinking water for livestock. Salinity and toxicity of the water must be tested. Too much salinity in drinking water can disrupt the water balance in cows, which might possibly lead to death. Toxic ions can also be detrimental to the health of cows.

Dairy farm owners should make sure that the drinking water treatment procedure for livestock, specifically for cows, should be on top of the priority list. It is important that livestock like cows drink only clean and safe water. This is to ensure that dairy farm owners and the public can both enjoy quality dairy products.


Well Water Treatment Systems


Water is essential for every day life. Not only that, but what is essential is clean water. If your water comes from a public or municipal system, then you should have little to worry about in terms of how safe or healthy your water is for use. There are state and local regulations that set standards for the quality of water that comes out of these systems. Water tests are regularly conducted to ensure that water is safe for drinking.

On the other hand, if your water comes from a private well or community well, then the responsibility of keeping it safe for human consumption is usually left in the hands of the end-users. This is where well water treatment systems come in.

Why use well water treatment systems?

While there are naturally-occurring contaminants in water that are not necessarily harmful to your health, there are other types of contaminants that are extremely hazardous. These contaminants contain toxic compounds that can kill animals, plants, and even humans.

Well water belongs to that group of water sources that are considered as “highly vulnerable” to contamination. This is especially true with water coming out of a poorly constructed well, or well that is located near a waste disposal area, such as a septic tank. There is danger of waste seeping through and mixing with the groundwater from which you draw your water.

Moreover, if your well has periodic episodes of poor water quality, then there is also a likely chance that your water supply may be susceptible to harmful bacteria and other contaminants.

Good well water treatment systems are those that can reduce, if not completely remove, these harmful contaminants in water so it is clean and safe for drinking. They help maintain the supply of high quality water, free of any harmful bacteria and other contaminants.

Choosing Between Well Water Treatment Systems

There are many different kinds of well water treatment systems. The effectiveness of each one depends entirely on the type of contaminants found in your well water supply. For instance, if your well is located near a sewage disposal area, then you need a treatment system that employs the sewage treatment method, wherein the water undergoes several stages of processing before it can be considered as safe for use.

American Hydro Systems TEST-8 Do It Yourself Well Water Test Kit

There is not one single well water treatment system that can treat all types of water. Others may be more effective with a particular type of water source while the rest are not quite so.

This is important to keep in mind when choosing well water treatment systems. Be sure to choose a well water treatment system that conforms to your water needs. Only in doing so will you be certain that water from your treatment system is safe.

Boiling Water Treatment

https://watersourceoflife.files.wordpress.comThere are three vital “commodities” in life for most living creature existence.  The absence of anyone of these commodities for a prolonged period would eventually result to death.  Throughout this entire blog the basic assumption is that “death” is not an option of choice.  The three vital “commodities are air, water and food.”  My focus in this article is on water (el agua).

Our bodies require water in order for us to function normally and to replenish the lost water due to perspiration.  How do we acquire the water that we depended on is safe for drinking?

The most affordable and the easiest among other methods of treating water is boiling.. Boiling water treatment is also the oldest way of ensuring that the water is safe at least for drinking.

Boiling water treatment is considered the best compared with other water treatment procedures. In boiling water treatment the presence of harmful bacteria, parasite, and virus that could possibly cause diarrhea are killed and thus, eliminated. However, boiling, filtering, or chemically treating water will not remove chemical or floating petroleum toxins.  For you bottle water people understand that boiling water treatment might affect the taste of water. In order to prevent this from happening it is advised that salt be added; at least a pinch will do to enhance the taste.

But how do we really do the exact and proper way of boiling water treatment? Are the steps easy to follow?

Yes in fact special equipment is not needed. A simple pot, kettle or steel water bottle will do.  Very dirty water should be filtered first with a cotton Bandana or other material (will be discuss in future article) to remove sediments.

If you are in the field (without a thermometer) you should heat your water until it reach a rolling boil (212° F or 100° C) and a drop of chemical disinfectant after a minute from boiling, will also help to ensure that water is now safe for drinking.

If you are in a place where you have a thermometer than:
30 minutes at 160° F
3 minutes at 185° F
Instant at 212° F

Do not contaminant your water by adding any untreated water/ice – be safe boil it all.
Boiling water treatment goal is to kill all pathogens in your water making it potable and safe for you to drink.  Boiling is the best step and the cheapest too, because again water is life, definitely.